YumengyangAuto Parts
WhatsApp Us

C0050 — Right rear wheel speed sensor circuit

OBD-II fault code · Wheel speed & ABS · updated 2026-11-10 · English version is the reference

C0050 is the right rear wheel speed circuit. On the pickups and SUVs common in our export markets this is the wheel that sees the most dust and the most flex.

What the code actually means

The right rear wheel speed signal is missing or invalid. On solid-axle vehicles the sensor sits on the axle or the hub and the cable runs along the axle beam — a route that copes with more movement than the front.

On our export markets, dust and mud are a bigger factor than salt. Grit works past seals and into connectors, and the sensor tip collects debris until the signal dies.

What you will notice

  • ABS light on, often after driving on unsealed roads
  • Traction control and stability control disabled
  • Intermittent ABS operation on rough surfaces
  • The light going off after the car is washed — a strong dust or mud clue
  • A speedometer or gearbox fault on cars using this signal

Our order of checks

CauseOur categoryWhy it is on the list
Failed right rear wheel speed sensorABS sensorsThe usual answer. Debris damage and cable fatigue.
Debris on the sensor tip or the ring—Very common on dusty roads. Clean and retest before ordering.
Cable break along the axle beam—The cable is clipped to the beam and the clips break, letting it rub.
Damaged tone ring—Stone damage and corrosion.
Water or mud in the connector—Clean, dry, grease and retest.

Test before you buy

  1. Read all four speeds on a rough road — that is where the fault shows.
  2. Remove the sensor and clean the tip and the ring.
  3. Check the cable clips along the axle beam.
  4. Compare resistance with the left rear before ordering.

The expensive mistake

Replacing a sensor that only needed cleaning. On dusty roads a wiped tip and a reseated connector fixes a real share of these. Ask the customer to clean and retest before you ship — it turns a return into a good relationship.

Parts we stock for a C0050

Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.

Our categoryPart numbersWhen
ABS Sensors2,066Right rear ABS sensor

Questions we get

Can dust cause a C0050?
Yes. Debris on the sensor tip or the ring changes the signal, and cleaning often restores it.
Why does the light go off after washing the car?
The water clears debris or restores contact. That is a clear sign the fault is contamination, not a dead part.

Contact

广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.

E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China

Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.

WhatsApp +86 159 1585 9048 OE / cross-reference lookup