P0100 — Mass or volume air flow circuit malfunction
P0100 is the circuit code for the mass air flow sensor — no usable signal at all. Unlike the P0101 family it is not a plausibility problem, it is silence.
What the code actually means
The MAF measures how much air enters the engine, and fuelling is calculated from it. If the ECU sees no signal, no implausible signal or a signal outside the electrical range, it sets P0100 and falls back to a default airflow map built from throttle position and rpm.
That default is why the car may still run — badly, rich at idle, flat under load. Drivers often report the light but no breakdown, which is exactly the profile of this code.
What you will notice
- Engine light with no obvious misfire, but the car feels flat above 3,000 rpm
- Rich running at idle: black smoke, fuel smell, plug fouling
- Poor fuel economy and a lazy throttle response
- A stall when coming to a stop on some engines
Our order of checks
| Cause | Our category | Why it is on the list |
|---|---|---|
| Failed mass air flow sensor | Mass air flow sensors | The most common answer, and cheap to prove if you can read live data. |
| Contaminated sensing element | — | Oil from an over-oiled filter or from the crankcase breather coats the element and kills the reading before the sensor fails. |
| Loose or corroded connector | — | Gives a hard no-signal, exactly like a dead sensor. |
| Intake leak between the MAF and the throttle | — | Unmetered air enters after the sensor. The ECU sees the wrong air mass but the sensor is working fine. |
| Blown fuse or a shared supply | — | Several sensors on one supply rail. Check the fuse before the part. |
Test before you buy
- Read live MAF grams per second at idle and at 2,500 rpm. A value stuck at zero or a value that does not rise with rpm is the diagnosis.
- Check the connector for corrosion and the supply voltage with the key on.
- Look at the element through the housing. A grey or oily film means clean or replace, not recalibrate.
- Before condemning the sensor, check for a split intake hose after the MAF — the most common false positive on this code.
The expensive mistake
Changing the MAF when the intake hose is split after it. The sensor reports the air it sees correctly; the engine gets more through the crack. A five-minute smoke test or a visual check of the hose saves the part.
Parts we stock for a P0100
Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.
| Our category | Part numbers | When |
|---|---|---|
| Mass Air Flow Sensors | 73 | Mass air flow sensor |
| Intake Pressure Sensors (MAP) | 113 | Check for a related MAP fault |
Questions we get
Can I drive with a P0100?
Will cleaning the MAF fix it?
Contact
广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.
E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China
Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.