YumengyangAuto Parts
WhatsApp Us

P0016 — Crankshaft / camshaft position correlation (bank 1 sensor A)

OBD-II fault code · Crank, cam & timing · updated 2026-11-10 · English version is the reference

P0016 is the one diagnostic code that can turn into a bent valve. It means the crank and the cam no longer agree on where the engine is, and on an interference engine that is a mechanical warning, not an electrical one.

What the code actually means

The ECU compares the crankshaft and camshaft signals and expects a fixed relationship between them. When the offset moves outside the tolerance — because the chain has stretched or jumped, or because a phaser is stuck — it sets P0016.

There is no sensor that fails in a way that only moves the correlation. If P0016 is present, something mechanical has moved. Treat it as urgent.

What you will notice

  • A rattle at cold start that lasts a second or two
  • Rough running, misfires and poor power
  • Hard starting, sometimes a no-start when hot
  • A P0011, P0017 or misfire codes appearing alongside
  • On badly jumped engines, valve contact noise and then a dead cylinder

Our order of checks

CauseOur categoryWhy it is on the list
Stretched timing chain or worn tensioner—The dominant cause. Chain engines past 150,000 km are the usual candidates.
Chain jumped a tooth—Sudden onset after a hard start or a low-oil event.
Stuck VVT phaserOil control valvesThe phaser cannot return to base position, so the correlation is wrong from the start.
Cam or crank sensor misreadingCamshaft position sensorsRare and easy to rule out by comparing both signals on a scope.

Test before you buy

  1. Check the timing marks physically before trusting any sensor reading.
  2. Look for chain stretch: with the crank at TDC, check whether the cam marks line up.
  3. Listen for the cold-start rattle. It is the cheapest evidence you will get.
  4. Do not sell a sensor for P0016 until the mechanical timing has been verified — it almost never fixes it.

The expensive mistake

Selling a cam sensor for P0016 and letting the customer keep driving. On an interference engine the next event is valve contact, and then the conversation is about an engine, not a sensor. Say plainly: this code is mechanical until proven otherwise.

Parts we stock for a P0016

Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.

Our categoryPart numbersWhen
Camshaft Position Sensors159Only after timing is verified
Crankshaft Position Sensors236For signal comparison
Oil Control Valves183If a stuck phaser is the cause

Questions we get

Is P0016 serious?
Yes. It means the timing has moved. On an interference engine, continuing to drive can destroy the valves and pistons.
Can a P0016 be fixed by a sensor?
Almost never. The correlation fault is mechanical. A sensor can only be the cause if both signals are electrically wrong in a matching way, which is rare.

Contact

广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.

E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China

Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.

WhatsApp +86 159 1585 9048 OE / cross-reference lookup