YumengyangAuto Parts
WhatsApp Us

P0505 — Idle control system malfunction

OBD-II fault code · Temperature, idle & throttle · updated 2026-11-10 · English version is the reference

P0505 is not a sensor failure, it is a control failure: the ECU tries to hold idle speed and cannot. That means air is getting in somewhere it cannot control.

What the code actually means

The ECU adjusts idle air — through a stepper motor, a solenoid valve or the electronic throttle itself — to hold a target speed. When the actual speed stays outside the tolerance band despite full correction, it sets P0505.

So the question is always: is the actuator stuck, or is there an uncontrolled air path? A vacuum leak defeats the idle control no matter how healthy the actuator is.

What you will notice

  • An idle that hunts up and down, or sits too high
  • A stall when coming to a stop or when the air conditioning engages
  • Rough idle that improves the moment you touch the throttle
  • A whistle or hiss from the engine bay
  • Sometimes a high idle only when cold

Our order of checks

CauseOur categoryWhy it is on the list
Carboned-up throttle bodyThrottle bodiesThe plate cannot close to the learned position, so idle air is wrong. Clean and relearn.
Sticking idle stepper motorIdle stepper motorsCarbon on the pintle stops it moving. Common on cable-throttle engines.
Vacuum leak—Uncontrolled air defeats idle control entirely. Smoke test it.
Failing throttle body (drive-by-wire)Throttle bodiesThe motor or the internal sensor degrades.
Dirty or failed idle air control valveVacuum solenoid valvesOn some engines the idle air valve is a separate solenoid.

Test before you buy

  1. Command idle speed up and down with a scan tool and watch whether the actuator responds.
  2. Clean the throttle body and the idle passage, then perform the relearn.
  3. Smoke test the intake for leaks.
  4. Check the stepper motor resistance and its movement with the key on.

The expensive mistake

Fitting a stepper motor or throttle body for an idle problem that is a vacuum leak. The new part cannot control air that is entering through a split hose. Smoke test before you quote, every time.

Parts we stock for a P0505

Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.

Our categoryPart numbersWhen
Idle Stepper Motors51Idle stepper motor
Throttle Bodies438Throttle body — clean before replacing
Vacuum Solenoid Valves25Idle air control valves on some engines

Questions we get

Can cleaning fix P0505?
Often, yes — carbon in the throttle bore and the idle passage is the most common cause.
Why does the idle drop when the AC comes on?
The ECU should raise idle to compensate. If it cannot, it is the same control fault.

Contact

广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.

E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China

Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.

WhatsApp +86 159 1585 9048 OE / cross-reference lookup