YumengyangAuto Parts
WhatsApp Us

P0352 — Ignition coil B primary/secondary circuit malfunction

OBD-II fault code · Misfire & ignition · updated 2026-11-10 · English version is the reference

P0352 is the circuit code for coil B — usually cylinder 2, but the letter follows firing order, not physical position. Get that wrong and the customer blames the part.

What the code actually means

The ECU switches coil B's primary circuit and watches the current profile and the secondary response. Anything outside the expected window — open winding, shorted winding, a driver that will not switch — sets P0352.

Coil letters follow the firing sequence. On a four-cylinder with firing order 1-3-4-2, coil A is cylinder 1, coil B is cylinder 3. On 1-2-4-3, coil B is cylinder 2. Always confirm the firing order for the engine before telling a customer which cylinder to work on.

What you will notice

  • Misfire on whichever cylinder coil B serves, sometimes only when hot
  • A hard start or a stall right after start-up
  • Roughness that a scanner shows as a rising misfire count on one cylinder
  • Occasional P0352 with no P030x code at all — the circuit is out of spec but still firing

Our order of checks

CauseOur categoryWhy it is on the list
Failed coil BIgnition coilsMost common, and the cheapest thing to rule in or out by swapping.
Connector or pin corrosion—Same circuit signature as a dead coil. Look before you order.
Damaged harness—Especially where the loom crosses the cam cover on transverse engines.
Worn plug raising the firing voltageSpark plugsA wide gap can push a healthy coil outside the ECU's expected window.

Test before you buy

  1. Swap coil B with a coil you know works and clear. Watch which code returns.
  2. If P0352 returns with a new coil in the B position, the fault is upstream: harness or ECU.
  3. Check the plug gap — a plug opened to 1.5 mm will stress the coil and can trip the circuit monitor.
  4. Inspect the coil boot for carbon tracking before you fit a replacement.

The expensive mistake

Using the physical position instead of the firing order to decide which cylinder is coil B. On 1-3-4-2 engines that is cylinder 3, not cylinder 2. A customer who fits a coil to the wrong cylinder will report "no change" and you will ship a second one.

Parts we stock for a P0352

Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.

Our categoryPart numbersWhen
Ignition Coils544Coil B — confirm the firing order first
Spark Plugs141Gap matters for this code

Questions we get

Is coil B always cylinder 2?
No. Coil letters follow firing order. On a 1-3-4-2 engine coil B is cylinder 3.
Can a P0352 come and go?
Yes, if the winding is breaking down with heat. That is also why a cold test can pass and the fault still be real.

Contact

广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.

E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China

Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.

WhatsApp +86 159 1585 9048 OE / cross-reference lookup