YumengyangAuto Parts
WhatsApp Us

P0302 — Cylinder 2 misfire detected

OBD-II fault code · Misfire & ignition · updated 2026-11-10 · English version is the reference

P0302 is the same fault as P0301 one cylinder along, but the part that fails is often different — on many engines cylinder 2 sits where heat and oil vapour collect first.

What the code actually means

Cylinder 2 is contributing less power than the others. The ECU measures crankshaft acceleration after each firing stroke and stores the code when cylinder 2 falls short on two consecutive drive cycles.

Cylinder numbering differs by maker: on most inline fours it runs from the timing end, but several Japanese and French engines number from the flywheel end. Check before ordering so the customer does not fit the coil into the wrong hole and then blame the part.

What you will notice

  • Idle vibration, often described as "a taxi at the lights", that fades with revs
  • A misfire that only appears when the engine is hot and disappears after a cold start
  • The light flashing during acceleration, then steady again
  • On some engines a slight whistle or hiss from the intake side at idle
  • P0302 together with P0303 points at a shared coil or a head gasket issue between the two

Our order of checks

CauseOur categoryWhy it is on the list
Coil on cylinder 2Ignition coilsFirst suspect on coil-on-plug engines, and the easiest to prove by swapping.
Spark plug conditionSpark plugsRead the plug from cylinder 2 before you order. A wet plug means fuel, a black dry plug means spark.
Oil in the plug well—A leaking cam cover gasket floods the well, the coil earths through the oil and misfires. No coil survives that.
Injector imbalanceFuel injectorsCommon on engines with a shared rail where cylinder 2 is furthest from the feed.

Test before you buy

  1. Swap the cylinder 2 coil with cylinder 3 and clear. If the code follows the coil, order one coil. If it stays, the coil is fine.
  2. Pull the plug and check the well for oil before refitting anything.
  3. Listen to the injector with a stethoscope or a long screwdriver: a dead injector is silent.
  4. Check compression on cylinder 2 if plug and coil are both good — a burnt valve misfires in exactly the same way and no part will fix it.

The expensive mistake

Ordering a coil for a car where the plug well is full of oil. The new coil will run for a few hundred kilometres and misfire again, and the customer will say the part is defective. Ask for a photo of the plug well before shipping — it takes one message and saves a return.

Parts we stock for a P0302

Stocked numbers and fitment for these categories are in the catalogue; message us with the car details and we will pick the right one.

Our categoryPart numbersWhen
Ignition Coils544Cylinder 2 coil
Spark Plugs141Read the old one first
Fuel Injectors168When the bank runs lean

Questions we get

Which cylinder is cylinder 2?
It depends on the engine family. On most inline fours it is the second from the timing end, but check the firing order for the exact model before ordering.
Can a P0302 damage the engine?
Unburnt fuel washes the cylinder wall and burns in the catalyst. Long enough and you add a catalyst to the bill.

Contact

广州驭盟扬汽配 · Guangzhou Yumengyang Auto Parts Co., Ltd.

E05, Yiyou (Guangyuan East) Auto Parts City, Baiyun District, Guangzhou, China

Send us the code, the car and the year. If this page points at several parts, we will tell you which one to change first — and which one not to change.

WhatsApp +86 159 1585 9048 OE / cross-reference lookup